38mm Airstriker Carburetor for CR250 KX250 YZ250 KTM 250

Sell your Stuff here
Post Reply
Message
Author
User avatar
mikeydidit98
Posts: 27
Joined: Thu Feb 28, 2008 5:59 pm
Location: Overland Park, KS
Contact:

38mm Airstriker Carburetor for CR250 KX250 YZ250 KTM 250

#1 Post by mikeydidit98 » Thu May 17, 2012 3:42 pm

This is a very nice Keihin PWK Air Striker 38 mm carburetor off of a 2004 Kawasaki KX250. It is in very good condition; all screws still look new - it was well taken care of. It has been disassembled and completely cleaned (it has NOT been sand/media blasted). The jets have been cleaned with the correct solvent. New 1/8" ID x 1/4" OD Oregon fuel lines have been added (not the cheap blue or other colored clear lines or the thin walled tubing, which are made from either polyurethane or nylon and will crack and brake... about right in the middle of an outing. It is ready to bolt onto your bike, quad or sled and go.

While it is from a 2004 Kawasaki KX250, it is a direct fit for years 1999 through 2007 Kawasaki KX250. This is also the same carb that is used on all the modern KTMs - 2003 and up, except it has the Throttle Position Sensor and the fuel injector solenoid system added to it, unlike the KTMs. So, pull those two things off (sell them for $20 on Ebay), plug the injector port with the correct bolt and o-ring, and you have a perfect carb for your 300XC 300XCW 250XC 200XCW 300EXC 300MXC 250EXC... You get the idea. Or, just leave them there and don't worry about doing anything with them. OR, WHY NOT RIG UP A NITROUS BOTTLE AND USE THIS AS THE INJECTOR SYSTEM WITH A SIMPLE ON/OFF SWITCH???!!! Oh yeah. NOW we are talking.

It is also a GREAT upgrade for any Honda CR250, or older YZ250 (both with their inherent carb issues), or RM250s or older KTMs. I have the throttle and cable to go with it, so you will not have to hassle with finding the correct set to go with it if you are converting over something other than a Kawasaki or a KTM.

$135, and it too can be yours. :)
You do not have the required permissions to view the files attached to this post.
Mikey ... Mad as a Hatter... Westendorf
(913) 594-2798

It's not my sanity that I worry about, it is HIM that worries me... that guy in my head that keeps telling me to crack the throttle harder.

'07 KTM 200XC
'00 KTM 250EXC

#901 in 2009
#806 in 2010
#707 in 2011
#507 for 2012

Ashman313
Posts: 1
Joined: Mon Feb 03, 2014 9:43 pm

Re: 38mm Airstriker Carburetor for CR250 KX250 YZ250 KTM 250

#2 Post by Ashman313 » Mon Feb 03, 2014 9:46 pm

Do you still have this? Very interested.

User avatar
Iamdanjohnson
Site Admin
Posts: 541
Joined: Fri Jan 05, 2007 12:17 pm
Location: Lawrence, KS

Re: 38mm Airstriker Carburetor for CR250 KX250 YZ250 KTM 250

#3 Post by Iamdanjohnson » Mon Feb 03, 2014 10:14 pm

Call him. He is not on here much lately.
Dan Johnson KTM 250 XC
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.

It's all good!

User avatar
KTMWade
Posts: 103
Joined: Fri Jan 05, 2007 2:31 pm
Location: Lenexa, Ks
Contact:

Re: 38mm Airstriker Carburetor for CR250 KX250 YZ250 KTM 250

#4 Post by KTMWade » Tue Feb 04, 2014 5:34 pm

I bought this from him...it is in my parts stash, it needed much more help than thought. I ended up buying another carb (new) from Carb Parts Warehouse for a couple hundred bucks rather than chase down the air leak in this one.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests