Hank's Place workers needed
- Iamdanjohnson
- Site Admin
- Posts: 541
- Joined: Fri Jan 05, 2007 12:17 pm
- Location: Lawrence, KS
Hank's Place workers needed
Even though I posted early I was still a little bit short at Beer West so this time I am posting 12 days early.
If you want to help out on Friday with set up, let me know.
On race day I like to have between six and ten people. It is two races so you can work both for your race day 1st place points average or you can ride one and help take things down after the race for your average points work average. More details on work averages are on the information page under 2016 rules. Post here or email ktms@fmhsc.com
Positions I need to fill are:
Gate
1. Jim Presley
2. Jason Schupp
3. Mark Shafer
4.
Greeter (helps new folks at sign up)
1. Ed Morris
2.
Scoring lane help
1. Ed Morris (race 1)
2. Matt Alexander (race 2)
Sweep and tear down after the race (two will also help sweep peewees)
1. Reece Williams
2. Bill Thomas (race 1)
3. Seth Thomas (race 2)
4. Jacob Caldwell
5.
6.
7.
8.Matt Alexander (tear down only)
If you want to help out on Friday with set up, let me know.
On race day I like to have between six and ten people. It is two races so you can work both for your race day 1st place points average or you can ride one and help take things down after the race for your average points work average. More details on work averages are on the information page under 2016 rules. Post here or email ktms@fmhsc.com
Positions I need to fill are:
Gate
1. Jim Presley
2. Jason Schupp
3. Mark Shafer
4.
Greeter (helps new folks at sign up)
1. Ed Morris
2.
Scoring lane help
1. Ed Morris (race 1)
2. Matt Alexander (race 2)
Sweep and tear down after the race (two will also help sweep peewees)
1. Reece Williams
2. Bill Thomas (race 1)
3. Seth Thomas (race 2)
4. Jacob Caldwell
5.
6.
7.
8.Matt Alexander (tear down only)
Dan Johnson KTM 250 XC
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.
It's all good!
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.
It's all good!
- KTM SLIM KARL
- Posts: 150
- Joined: Sat Jan 06, 2007 8:15 am
- Location: FUSSA JAPAN
Re: Hank's Place workers needed
Hay Dan no moto so I can help Fri Sat and Sun.I am not going to race but miss just hanging out and do some riding I will bring the flags all my sound system for the anthem! talking to slow Joe to come out! all of the old 700 club come out we can sit around and talk about how good we are HA! HA! It has been a long time and miss all the good times I had years ago! all about the fun of just being there!
IT IS THE LOVE OF OFF ROAD RACING THAT DRIVES ME AND MY INTENTIONS ARE CLEAR
IS THAT I LIVE FOR THE MOMENT I AM NOT AFRAID TO FAIL
I WOULD RATHER FAIL MAGNIFICENTLY THEN FAIL TO TRY
Mo, MX #750
FMHSC#1050
2011 KTM 350 sxf
1980 KTM 250 mx
IS THAT I LIVE FOR THE MOMENT I AM NOT AFRAID TO FAIL
I WOULD RATHER FAIL MAGNIFICENTLY THEN FAIL TO TRY
Mo, MX #750
FMHSC#1050
2011 KTM 350 sxf
1980 KTM 250 mx
-
- Posts: 9
- Joined: Mon Sep 15, 2014 1:36 pm
- Location: Knob Noster Missouri
Re: Hank's Place workers needed
Dan I can work the gate or sign up. I plan on racing the second race.
Jim Presley
2015 KTM 300XC-W
#1004 -2016
#1099 -2014-2015
#719 -2012-2013
#819 -2011
#9178 -2010
2015 KTM 300XC-W
#1004 -2016
#1099 -2014-2015
#719 -2012-2013
#819 -2011
#9178 -2010
- Pumpkinpatch
- Posts: 272
- Joined: Fri Jan 05, 2007 11:00 pm
Re: Hank's Place workers needed
Dan,
I think we are down to one bike; I can help wherever you need me on race day.
I think we are down to one bike; I can help wherever you need me on race day.
Mark Shafer
Rider #511 FMHSC
Proud Papa of #60 & #5
Thanks to #pumpkinpatchracing, Letko Cycles, MSR, EVS, DeCal Works, Atlas, 100%, Motorcare, HeavyD, DT1, Mika Metals
Rider #511 FMHSC
Proud Papa of #60 & #5
Thanks to #pumpkinpatchracing, Letko Cycles, MSR, EVS, DeCal Works, Atlas, 100%, Motorcare, HeavyD, DT1, Mika Metals
-
- Posts: 14
- Joined: Tue Jan 13, 2015 1:22 pm
Re: Hank's Place workers needed
Dan put me down for the gate, sign up or sweeping the first race I am planning on racing the 2nd race
Please and thank you
Please and thank you
Jason Schupp
2015 #1044
2014 #944
2015 #1044
2014 #944
-
- Posts: 97
- Joined: Fri Jan 05, 2007 7:42 pm
- Location: Warrensburg MO
Re: Hank's Place workers needed
Dan - sign me up for the first race scoring lane. I'll be racing in the second race
Last edited by Ed M on Fri Jun 17, 2016 9:16 pm, edited 1 time in total.
Ed M
DETERMINATION: The feeling you get right before you try do something incredibly stupid
2013 KTM 350XCFW
#1086 for 2012, 2013, 2014, 2015......
#786 for 2011
#786 for 2010
#906 for 2009
#1006 for 2008
DETERMINATION: The feeling you get right before you try do something incredibly stupid
2013 KTM 350XCFW
#1086 for 2012, 2013, 2014, 2015......
#786 for 2011
#786 for 2010
#906 for 2009
#1006 for 2008
- motoracr199
- Posts: 75
- Joined: Thu Mar 22, 2007 6:25 pm
- Location: Kansas City, MO
Re: Hank's Place workers needed
I don't mind helping tear down.
David Stewart
Thanks to Dunlop, AXO, Dragon, and Fly Racing
#329
Thanks to Dunlop, AXO, Dragon, and Fly Racing
#329
- Iamdanjohnson
- Site Admin
- Posts: 541
- Joined: Fri Jan 05, 2007 12:17 pm
- Location: Lawrence, KS
Re: Hank's Place workers needed
David I may need your help with tear down.
If you have contacted me, make sure I have you down on the list at the start of this thread.
It looks like I could still use a few more people.
If you have contacted me, make sure I have you down on the list at the start of this thread.
It looks like I could still use a few more people.
Dan Johnson KTM 250 XC
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.
It's all good!
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.
It's all good!
-
- Posts: 1
- Joined: Mon Jun 20, 2016 10:25 pm
Re: Hank's Place workers needed
Hey Dan, won't have my bike ready to race this weekend, so can help out wherever besides help sweeping; just let me know.
Matt Alexander
#658 Honda
C Class
Matt Alexander
#658 Honda
C Class
- Iamdanjohnson
- Site Admin
- Posts: 541
- Joined: Fri Jan 05, 2007 12:17 pm
- Location: Lawrence, KS
Re: Hank's Place workers needed
Matt,
I will use you for race 2 back up sheets and taking down after. That will let you arrive by 1:00 if you want but whenever is fine. If you come early then I may use you helping with PW's at 9:00 but not a big deal. There is always something to do!
I will use you for race 2 back up sheets and taking down after. That will let you arrive by 1:00 if you want but whenever is fine. If you come early then I may use you helping with PW's at 9:00 but not a big deal. There is always something to do!
Dan Johnson KTM 250 XC
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.
It's all good!
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.
It's all good!
Who is online
Users browsing this forum: No registered users and 3 guests