New Rib Plating Procedure
Posted: Tue Jan 28, 2014 9:53 am
I didn't post this in the rider down section because I'm not down anymore. This is just an FYI for those who have not seen this new procedure. Since we are T-minus 33 days till the season starts - something to keep in mind. If the post needs to be moved - sorry.
I broke some ribs at Chanute last season. I went the normal route - x-rays and oral pain meds. My general med doc looked at the x-rays and said I broke 3 ribs with one displaced on the back. I missed 6 weeks of work from the firehouse and still have some issues with the displaced ribs that have healed together a little shorter than stock. At the time I was only offered the standard rib treatment protocol.
Later I found Dr. Kaye who works at Overland Park Regional Medical Center. Dr. Kaye is a trauma surgeon who specializes in a new rib plating procedure. By the time I found out about the newer plating procedure it was too late for me. My displaced ribs had already stitched together and he was happy with their alignment - even though they were both about a 1/2" shorter. During his office visit he sent me down to the main hospital to get their new 3D CT scan of my chest. This procedure took about 5 mins. He said that X-rays are a terrible way to diagnose fractured ribs. With this new style of CT he found that I had 5 fractures total with 2 displaced on the back. No wonder I was hurting for so long. Lucky, things had stitched together and there was nothing he could do to make it better without breaking the old ones and starting over. He said that after plating, people are reporting no pain at the fracture site and usually begin to regain normal function in 4-5 days after being released from the hospital. There is also healing time from the small incision required to place the plate. However, he said for major trauma to the chest the incision might be much larger.
His procedure ideally needs to be performed within 10 days of fracture. The main benefit of the plate for me would have been pain free healing healing. The plates keep the ends from grating and speed up the healing process. He's trying to spread the word of this new procedure and hates to hear about people who went the conventional route and are still suffering. He's one of the few guys in the Midwest doing this procedure and he's central to FMHSC. I've included a link to an article that talks about the procedure. Also, I've included a few pics of my 3D scan so you can see what I'm talking about. Hope this helps someone. He uses most insurance groups. I'm on Cigna and the 3D scan cost me $200 co-pay - new year-new deductible:(
See you all soon.
http://www.google.com/url?sa=i&rct=j&q= ... 2712881720
[img][IMG]http://i113.photobucket.com/albums/n238 ... G_3956.jpg[/img][/img]
[img][IMG]http://i113.photobucket.com/albums/n238 ... G_3958.jpg[/img][/img]
I broke some ribs at Chanute last season. I went the normal route - x-rays and oral pain meds. My general med doc looked at the x-rays and said I broke 3 ribs with one displaced on the back. I missed 6 weeks of work from the firehouse and still have some issues with the displaced ribs that have healed together a little shorter than stock. At the time I was only offered the standard rib treatment protocol.
Later I found Dr. Kaye who works at Overland Park Regional Medical Center. Dr. Kaye is a trauma surgeon who specializes in a new rib plating procedure. By the time I found out about the newer plating procedure it was too late for me. My displaced ribs had already stitched together and he was happy with their alignment - even though they were both about a 1/2" shorter. During his office visit he sent me down to the main hospital to get their new 3D CT scan of my chest. This procedure took about 5 mins. He said that X-rays are a terrible way to diagnose fractured ribs. With this new style of CT he found that I had 5 fractures total with 2 displaced on the back. No wonder I was hurting for so long. Lucky, things had stitched together and there was nothing he could do to make it better without breaking the old ones and starting over. He said that after plating, people are reporting no pain at the fracture site and usually begin to regain normal function in 4-5 days after being released from the hospital. There is also healing time from the small incision required to place the plate. However, he said for major trauma to the chest the incision might be much larger.
His procedure ideally needs to be performed within 10 days of fracture. The main benefit of the plate for me would have been pain free healing healing. The plates keep the ends from grating and speed up the healing process. He's trying to spread the word of this new procedure and hates to hear about people who went the conventional route and are still suffering. He's one of the few guys in the Midwest doing this procedure and he's central to FMHSC. I've included a link to an article that talks about the procedure. Also, I've included a few pics of my 3D scan so you can see what I'm talking about. Hope this helps someone. He uses most insurance groups. I'm on Cigna and the 3D scan cost me $200 co-pay - new year-new deductible:(
See you all soon.
http://www.google.com/url?sa=i&rct=j&q= ... 2712881720
[img][IMG]http://i113.photobucket.com/albums/n238 ... G_3956.jpg[/img][/img]
[img][IMG]http://i113.photobucket.com/albums/n238 ... G_3958.jpg[/img][/img]