Congratulations Macon Ezell

General Bike Talk
Post Reply
Message
Author
User avatar
Iamdanjohnson
Site Admin
Posts: 541
Joined: Fri Jan 05, 2007 12:17 pm
Location: Lawrence, KS

Congratulations Macon Ezell

#1 Post by Iamdanjohnson » Mon Nov 07, 2016 10:06 am

Looks like we have a new number 1 plate for 2016!

2007 7th in JR
2008 2nd in JR and experimented in 900 and 800 class for the last two.
2009 4th in B after riding 5 in 600's and 1 in the 400's.
2010 3rd in A and 5th Overall
2011 2nd in AA and 2nd Overall
2012 1st in AA and 1st Overall
2013 1st in AA and 1st Overall
2014 1st in AA and 1st Overall
2015 3rd in AA and 2nd Overall
2016 1st in AA and 1st Overall

If my math is correct that would be four times now!
Dan Johnson KTM 250 XC
Thanks to the support I get from Debbie, Jadan, Grayson, and Karly Johnson AND Dunlop, Letko, Cycle Zone, Motorcare.

It's all good!

User avatar
WireFryer
Posts: 178
Joined: Sun Jan 07, 2007 7:09 pm
Location: Mulvane, Ks Inc.

Re: Congratulations Macon Ezell

#2 Post by WireFryer » Mon Nov 07, 2016 8:32 pm

Well done , Macon! 8) .

The numbers alone kinda boggle the mind!
The saddest sound in all MotorSports is the noise the drivetrain makes as you slowly coast to a complete stop.

User avatar
Pumpkinpatch
Posts: 272
Joined: Fri Jan 05, 2007 11:00 pm

Re: Congratulations Macon Ezell

#3 Post by Pumpkinpatch » Mon Nov 07, 2016 9:34 pm

Of course. Congrats to Macon. Nice work young man.
It's all those miles behind the steering wheel going to the NEPG races that did it for you huh?

And Jadan too.... What a finish to the season.
Counting points to the single digits to the very end of the last race.
Good stuff. And two great young guys to represent.

Future looks bright based on the current top 20 or so overall and many up and coming young ones.

All fine racers and people.
Makes one proud of the FMHSC series, eh?
I'd say so.........
Mark Shafer
Rider #511 FMHSC
Proud Papa of #60 & #5

Thanks to #pumpkinpatchracing, Letko Cycles, MSR, EVS, DeCal Works, Atlas, 100%, Motorcare, HeavyD, DT1, Mika Metals

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests